Tank Washing | CIP Equipment |
|
|
Fixed spray heads | Single axis
heads / reaction drive | Single axis heads
/ motor drive
PNR has developed a comprehensive range of tank washing devices since it started production in 1968. Primarily this has been the quest to produce CIP wash machines with greater efficiency,
but it is also to assure we produce the highest quality product we can.
Environmental considerations
have also been influential; the need to reduce energy and water consumption and also the disposal of effluents; chosing the the
right tank washing head can be very energy efficient.
Our range of tank cleaning devices, from the classic fixed head, to the more sophisticated
models, have been developed to cope with the most demanding
of industrial applications.
Please request a catalogue
for further information.
Download
brochure
|
Fixed Tank Cleaning (CIP) Spray Nozzles
|
|
   The
most basic tank-washing device still used in thousands of tank
cleaning applications.
Due to their low impact properties and high volume fluid requirements,
they are most suitable for small tanks where easily cleaned
liquids and non-sticking powders need to be eliminated.
Our
models UAA & UAB are made out of high quality stainless
steel and cover most applications; we will also quote for special
models to suit individual requirements. |
|
Single Axis Tank Cleaning (CIP) Nozzles | Reaction Drive
|
|
These popular devices perform very satisfactory in a great number of general applications, with limited size tanks. |
|
Single Axis Tank Cleaning Nozzle | Motor Drive
|
 In
a motor-driven tank cleaning nozzle the head rotates around a
single axis at a controlled speed. The nozzle head rotates using a simple motor that limits the
speed to a few rpm.
Thus the jets do not break into droplets, and all their
impact force is used to impinge on the tank wall. |
Back to top of page |
PNR MATERIALS
Many of the products shown in this catalogue are available
in different materials; please see our materials
list for details. |
Further information can be found in our Technical Reference
Manual, which is available on request. |
If you require further assistance in your choice of Industrial
Tank Washing Systems, please contact our in-house engineering
team on +44(0)
1527 579066. |
| |
Single
axis reaction driven CIP heads are driven purely by the action
of fluid as it is forced through the device. The rotating speed
is determined by the operating pressure, which must be limited
to avoid the water jets being broken up into small droplets. 