PROPER FILTERING FOR THE WASHING LIQUID

Small inner passages and precision machined parts are typically found in tank washing equipment. In cases where the washing cycle uses a recycled solution, solid particles may affect the washing operation. In these setups we would recommend a suitable line filter be used, see our accessories catalogue for details.

CORRECT CHOICE FOR WASHING CYCLE AND SOLUTION

Based on the type of product that is to be cleaned, each process should be examined very carefully in order to define the appropriate washing fluid, the desired temperature, wash time and the correct jet pressure.

ADEQUATE MOTIVE MECHANISM

The number of products that need to be removed from a tank is near to endless and each one has its own unique properties. This can require several types of washing cycles, our range of heads have sufficient versatility to combat these differing requirements.

CLEANING RADIUS / WETTING RADIUS

Many applications may only require a rinse to clean inside a vessel, and therefore the wetting radius or a jet set at it lowest projection maybe all that is required for a sufficient wash. However, for heavily soiled vessels, high-pressure cleaning and the correct cleaning radius are desirable for an effective wash. We shall be glad to put our experience at you service, and advise you about the most suitable equipment to perform your washing job with an optimum performance.